Top 9 Uniform Name Plate Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. Onwon


Onwon 10 Pieces Name Badge Magnets Magnetic Name Tag Holders ID Fastener Clip with Three Premium Strength Neodymium Magnets and Adhesive Backing, No Holes in Your Fine Jackets or Shirts, Black

Onwon #ad - The permanent magnets naturally adhere to the steel badge plates through your shirt or jacket lapel. Simple and useful design - these strong name tag magnets coming with three neodymium magnets will firmly hold your badges through shirts, jackets or even winter coats.

This means that your neodymium magnet name badge stays firmly in place through almost any material, even outerwear. These magnetic name badges do not require you to insert a pin through your jacket to wear a name tag. The back plate of the set is made of stainless steel with 3M peel-n-stick adhesives pre-applied.

Friendly to all fabrics - nickel-copper-nickel triple layer coated for maximum neodymium magnets durability and protection against corrosion. The whole set of the magnetic has 2 parts, easily hold name tag, adhesive top and magnet fastener attached to back, easy for you to use. Wide applications - the size is 1. 78 x 024 x 051 inches/ 4. 5 x 06 x 1.
BrandOnwon #ad
ManufacturerOnwon #ad
Part NumberCSP0674

2. Kigeli


150 Packs Name Badge Magnets, School, Uniform Jackets, Black, Magnetic Name Tag Holders with 3 Neodymium Magnets Name Plate Magnet Back for Office, Trade Event, Hotel

Kigeli #ad - Two piece design: the magnetic name tag holders are divided into 2 parts, and 3 neodymium magnets of the black plastic back plate have the ideal magnetic ability to easily hold name tag, the steel back plate has a adhesive backing, badge or ID on clothing.

Reliable material: our magnetic backs for name badges are mainly made of quality stainless steel and plastic materials, and regular edges, break, and fall off, smooth surface, featuring fine workmanship, not easy to rust, can serve you for a long time. Quantity and size: you will receive 150 packs of magnetic name badges, the size of each of them is approximately 1. 8 x 05 x 025 inch length x width x thickness, suitable for most name tags, sufficient quantity for daily and event use. Easy to use: these magnetic name backs can be installed without any pins, clips; Just stick the steel plate on the name tag or badge, and place the plastic back plate and the nameplate on each side of the garment, then the magnets will automatically attract together.

Wide applications: the small name badge magnet is suitable for conferences, shirts, hotel, office, trade shows, uniform, and they are easy to attach other accessories such as clothing, and even winter coats, etc. Jackets, school, very stable and practical.
BrandKigeli #ad
ManufacturerKigeli #ad
Part NumberKigeli-85236



Office Business Desk Sign Holder Desktop Wall Or Door Holder Choose Color and Type 2x10 inch, 2"x10" Aluminum Name Plate Holder

NEMOCI #ad - 2x10 name plate holder. Delivered within 15 days. Nameplate not included, You could customize engraved nameplate in our store. Choose: wall mount or sit on desk. Choose: silver, rose gold, black, or yellow gold.
BrandNEMOCI #ad
ManufacturerNEMOCI #ad
Part Number2-10

4. Lenink


Business Department, Lenink 6 Pack Name Plate Holder, Warning Area 8” X 2” Silver, Wall Mount Office Door Name Plate Holder for Meeting Room

Lenink #ad - Super viscosity: the back of the wall mount is made of double sided thick tape, which has strong adhesive force and can bear the gravity of the Name Plate Holder, and not easy to fall. Easy to use: simply tear off the adhesive tape on the holder and stick it on door or wall.

Application: these office door name plate holder can be pasted on walls and doors, meeting rooms, which is a perfect way to identify business departments, office areas, warning areas and so on. Exquisite and practical: the exquisite nameplate holders is made of strong and durable aluminum, name title, they can help you to identify the room number, wall sign, cubicle, office room and other areas.

Package: 6 pieces 8×2in name plate Holder nameplate not included. Wall mounted nameplate holder provide a simple way for you to display information. If necessary, it can be drilled for installation, then you can display your name and title in a professional way.
BrandLenink #ad
ManufacturerLenink #ad
Part NumberK2126B01

5. totalElement


Strong Fastener with 3M Adhesive on Front Plate Silver 10-Pack, totalElement Magnetic Name Tag/ID Badge Holder

totalElement #ad - Simple multi-purpose design works for arts & crafts, hanging signs and posters, and attaching other accessories to clothing. 10 sets of badge holders Included, Name Tags/Badges Sold Separately. Strong, safe and secure way to attach and show credentials without damaging clothing or uniform. Dimensions: 44mm 1. 75” long by 12mm 05” wide. Front magnetic plate has adhesive backing to easily hold name tag, badge or ID.
BrandtotalElement #ad
ManufacturertotalElement #ad
Height1 Inches
Length5 Inches
Weight0.25 Pounds
Width4 Inches

6. Lasercrafting


Size Options Customize, Lasercrafting Name Badge tag or Trophy/Picture Label, pin, Engraved -Magnet, Tape or Screws

Lasercrafting #ad - Great for labeling pictures, mailbox and Urns. Name badge or label, screws, select backing in customization box pin, tape, or magnet. To start, click the "customizE NOW" box. Edge choices in customization box square, rounded, or scalloped. Size choices in customization box.
BrandLasercrafting #ad
ManufacturerLasercrafting #ad
Height1 Inches
Length3 Inches
Weight0.04 Pounds
Width0.16 Inches
Part NumberOP-4943

7. Providence Engraving


2" x 8", Providence Engraving Personalized Desk Name Plates, Custom Office Wall or Desk Name Plates with Aluminum Holder with Two Lines of Laser Engraved Text

Providence Engraving #ad - The desktop name plates easily slide into their anodized aluminum desk holders, which come in polished silver, matte black and polished rose gold options. These name plates are manufactured in the United States using high-quality, acrylic-based plastic for long-lasting results.

Choose between 12 different plate colors and 9 different fonts to ensure your desktop name plate matches your brand's aesthetic and your own personal sense of style. Each customized name plate has room for up to 2 lines of text. This 2-inch by 8-inch name plate can be wall-mounted or sit on a desk, making your office look professional and communicating essential information to clients and staff members. Engraved by a precision CO2 laser, lettering is easy to read, even from a distance.
BrandProvidence Engraving #ad
ManufacturerProvidence Engraving #ad
Height0.5 Inches
Length4.72 Inches
Weight0.21 Pounds
Width4.33 Inches
Part Number2X8WHDH

8. GlossyEnd


Hardware and Inserts are Not Included, Set of 6 – Sturdy and Elegant Black Aluminum Wall Mount Name Plate Holder, Office Business Door Sign Holder, 8” X 2”

GlossyEnd #ad - These aluminum office name plates Are a Perfect Way to Identify Doors, Cubicles, Office Areas and More. Set of 6 – sturdy and elegant black aluminum wall Mount Name Plate Holder, Office Business Door Sign Holder, 8” X 2”.

Lead customers and clients to an information center or Patient Checkout Door, or Just Let Customers Know They’ve Found the Right Person in an Area Full of Doors. Name plates are also a fun way to reward Employees of the Month or Acknowledge Nicknames and Office- or Store Related Superlatives. Display your name and title in a professional Way for Better Reputation – "Hardware and Inserts Are Not Included".
BrandGlossyEnd #ad
ManufacturerGlossyEnd #ad
Height0.01 Inches
Length8 Inches
Width2 Inches
Part NumberGE46159



Personalized Office Engraved Name Plate with Wall or Desk Holder 2"x10"

ICOMECN #ad - Ships quickly --arrived within 15 Days, Expedited delivery in 7 Days. 100% satisfaction, if you are not satisfied, acrylic-based plastic for long-lasting results, these name plates are manufactured using high-quality, you will get the full payment.

Personalized name plates for desks or wall plates for door is the best choice for business office, professionals or wherever you want to stand out or make a statement. 2”x10” customized name plate with beautiful Desk Holder or Wall mount includedWall mount with free double-sided tape. Custom select font and Name Plate Color and up to 2 lines of engraving included.
BrandICOMECN #ad
ManufacturerIcomecn #ad
Height0 Inches
Length10 Inches
Width2 Inches
Part Number2"x10"Name Plate With Wall or Desk Holde